Digital Equipment Corporation RAID Array 3000 storage subsystem Guía de instalación descargar pdf (Pagina 13)

Second Controller Option

EK–SM3KC–IG. C01 3

2.1 Save Existing Configuration

NOTE

You must save the subsystem configuration using the

Command Console Client (SWCC) before performing

the installation procedure. Otherwise, the RAID control-

ler may lose your configuration.

To save your current configuration:

Select the

Storage

pull-down menu from the Toolbar (see Figure 2), click on

Con-

troller,

select

Configuration

, and then

Save

Figure 2. Saving the Existing Configuration

A saved configuration screen with a “Save to File” field appears as shown in Figure

3. The example below lists the file name as

c:\config1

Enter your file name in the “Save to File” field and click on

Save

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 21 22

Sin comentarios

Digital Equipment Corporation RAID Array 3000 storage subsystem Guía de instalación Pagina 13